| | |
|
| Opacity Cards |
Our own opacity testing card
with sections to file and give to your customer for their
records.
410-120-2-PK 4" x 11" 
|
| Wet Film Applicator |
 These precision wet film applicators are used in conjunction with paper charts, hiding power charts, plate glass or any other smooth, flat surfaces. They are simple, accurate experimental or quality control devices that require no adjustments.
General Instructions
A small quantity (depending on length and thickness of film required) of the material to be checked is placed on the inside of the channel near the correct opening for the thickness desired. The applicator is then drawn down over the chart or other surface and a uniform thickness of film is produced for observation and test.
A path with a depth or a clearance of one mil will lay down a film approximately 1/2 mil thick. A latex film will shrink considerably more, so paths of greater depths are required in order to obtain a dry film thick enough to check flexibility and toughness.
410-100-1 Steel/8
Path Unit
General Uses
Film thicknesses deposited may vary from 40% to 80% of the actual clearance.
- Adhesives
- Board
- Ceramic Colors
- Cosmetics
- Driers
- Duplicating Inks
- Resins
|
- Lacquers
- Cellulose
- Oils
- Pigments
- Plastics
- Printing Inks
|
- Waxes & Hot Melts
- Metallic Powders
- Floor Polishes
- Varnishes
- Fillers
- Emulsions
|
|
| Gram Scale |
 Traditional
double beam scale with weights.
400-518-1 |
| GF-3000 Electronic Gram Scale |
The GF-3000 incorporates the unique SHS technology and defies comparison with all others. Our revolutionary and patented Super Hybrid Sensor (SHS) technology improves response speed and inimizes maintenance costs. Its unique design provides the fastest response speed in its class--an amazing one-second. SHS combines the best of magnetic force restoration and single point parallelogram load sensing technologies.
Digital display with tare, grams/pounds units are very accurate.
Capacity 
Gram: 3100g
Milligrams: N/A
Decimal Ounce: 109.3495
Troy Ounce: 99.6675
Pennyweight: 1993.35
Carat: 15500.00
Momme: 826.665
Grain Unit: 47840.4
Tael: N/A
Tola: N/A
Accuracy
Percentage Min. Div: 0.01%, 0.1%, 1%
Counting Min: 0.01g
Linearity: ±0.02g
Repeatability: 0.01g
Stabilization Time: 1 seconds
Sensitivity Drift: ±2ppm/°C(10°C~30°C/50°F~80°F)
Physical
Display Refresh: 5 times per second/10 times per second
Pan Size: 165 x 165mm/6.49 x 6.49 inches
Dimensions (mm): 210(W) x 317(D) x 86(H)
Dimensions (in): 8.27(W) x 12.48(D) x 3.39(H)
Breeze Break (mm): N/A
Breeze Break (in): N/A
Operating Temp: 5°C~40°C/41°F~104°F RH less than 85%
Power: Approximately 11VA
Std Accessories: Manual, AC Adapter, Dust Cover
400-519-4 GF-3000 Unit
|
| Durometer
Testers |
 
A durometer reading tells you the strength of the material
that the squeegee is made of. You really need this if you
don't use our colored blades.
400-175-1 #1500-A pocket style
400-175-2 #1600-A with dial face and
case
|
| Atkins Digital Thermometer
- Designed for T-shirt Printers |
 This is the most accurate method of checking ink and shirt
temperature in the dryer. Digital readout shows temperature
of whatever it is touching. The probe has a long wire, so
it can measure the temperature of your shirt as it goes
through the dryer. Includes donut probe, long high-temperature
wire, case and your first battery.
The "Donut" Screen Printing Probe is specially designed to meet the needs of today's Screen Printers. The sensor wires are constructed of very fine gauge alloy metals, especially choosen for their temperature-sensing properties. The wires are designed to make direct contact with the ink. Many other temperature measuring devices are capable or reading only the temperature of the air around the silk screened item. The rise and fall of the ink temperature may be significantly different than that of the garment or the surrounding air.
Temperature Range: |
|
-40° to 1832°F / -40° to 1000°C |
Temperature Accuracy: |
|
±0.9F°/ ±0.5C° from -40° to 495°F (-40° to 257°C); ±6% of reading remaider of range |
Resolution: |
|
Whole Degree in Fahrenheit / Tenth Degree (up to 257°) in Celsius |
Auto Off: |
|
Yes, after 5 minutes non-use |
F/C Switchable: |
|
Yes |
Certification: |
|
CE Component |
Water Resistant: |
|
Yes |
Warranty: |
|
5 Year Instrument Warranty |
Power Supply: |
|
(1) AA Battery |
Battery Life: |
|
1000 hours |
Features: |
|
• Easy twist-open battery hatch |
|
|
• Replaceable probe connector if it becomes damaged |
|
|
• Can use with any thermocouple probe that has a standard mini-connector |
716-050-1 |
| Thermo-Tel Heat Sensitive
Tapes |
 Thermo-Tel
Heat Sensitive tapes are great for estimating dryer temperatures.
Temperature ranges from 100° F to 500°
F available in 8 different temperature ranges. Eight
pressure-sensitive strips to a set. Easy to use and inexpensive.
400-100-1 #1 (100°-130°F)
400-100-2 #2 (140°-180°F)
400-100-3 #3 (190°-230°F)
400-100-4 #4 (240°-280°F)
400-100-5 #5 (290°-330°F)
Most Popular
400-100-6 #6 (340°-380°F)
400-100-7 #7 (390°-435°F)
400-100-8 #8 (450°-500°F)
Supplies
Index 
|
| MiniTemp Portable Infrared Non-Contact Thermometer |
 The MiniTemp™ IR
thermometer—a new way to
solve common problems.
Infrared (IR) thermometers have become the preferred
tool for diagnostics and inspection where temperature
is an indicator. IR thermometers are valued by
professionals in a variety of industries—from industrial
maintenance to food service, because they quickly, accurately
and safely measure surface temperature! Anywhere that temperature
is a factor in process, product quality or diagnostics, a IR
thermometer should be close at hand.
IR thermometers are easy to use, and since they do not contact the object
being measured, they are the safest way to measure hot, hard-to-reach, or
moving parts, while eliminating potential damage and contamination.
The MiniTemp thermometers incorporate many of
the same features found in professional IR thermometers. The MiniTemp thermometer
is perfect for auto enthusiasts performing self diagnostics and for those tackling
home improvement projects. Use it for spotting costly energy losses around windows
and doors, monitoring critical temperatures in kitchen
or workshop, or ensuring the environment is
comfortable and safe.
Just pull the trigger! The MiniTemp thermometer shows
the temperature in an instant on its large, backlit
display. The simple to use MiniTemp thermometer
becomes even easier to operate when aiming with
the laser point. The MiniTemp
thermometer: Smart, Simple, Safe—Convenient!
■ Simple to use
■ Instant readings
■ Laser Point (MT4)
■ Large, easy to read display
■ Temperature Range (MT4)
-18º to 400ºC (0º to 750ºF)
■ ºC or ºF selectable
410-600-2 Fixed Emissivity
Temperature Range: -18 to 400°C
(0 to 750°F)
Accuracy: -1°C (30°F) to 275°C (525°F) ±2% or ±2°C
(±3.5°F) whichever is greater
-18°C (0°F) to -1°C (30°F) ±3°C (±5°F)
Repeatability: ±2% of reading, or ±2°C (±3°F),
whichever is greater
Response time: 500 mSec, 95% response
Spectral response: 7–18 μm
Emissivity: pre-set 0.95
Ambient operating range: 0 to 50°C (32 to 120°F)
Relative humidity: 10–95% RH noncondensing,
@ up to 30°C (86°F)
Weight / Dimensions: 227 g (0.5 lb); 152 x 101 x 38 mm
(6 x 4 x 1.5 in)
Power: 9V Alkaline or NiCd battery (included) - 12hrs Battery Life
Laser: Class II
Distance to Spot Size: 8:1
Typical Distance to
Target (Spot): Up to 1.5m or 4 ft
Temperature Display: ºC or ºF selectable
Note: Using this infrared temperature gun can provide inconsistant result,
depending on use. It is best to use this gun in conjunction with Lawson Thermo-Tel
Temperature Tapes when checking for plastisol cure. |
| Premium Infrared Non-Contact
Thermometer |
 The professional’s diagnostic tool
non-contact thermometers
are the ideal professional diagnostic tools for HVAC
technicians performing room balance checks, electricians
evaluating electrical connections and auto mechanics
diagnosing catalytic converters. This handheld portable
tool enables professionals to research heating and ventilation
problems, monitor the status of electrical motors
and electrical panels and diagnose car malfunctions with
ease. They measure surface temperatures, helping to
quickly locate potential blockages or malfunctioning
systems reducing work time and improving performance.
The thermometers feature:
• Laser guided sighting system for easy targeting with
1 % accuracy.
• 12-point data logging.
• Advanced optics to measure smaller targets at greater
distances.
• Adjustable emissivity for more accurate temperature
measurements.
• Selectable MAX, MIN, DIF and AVG functions that
display values instantly with Hi/Lo Alarm.
Optical resolution
The laser sighting system guides measurements to the
right target and indicates the approximate center of the
measurement area.
(D:S = distance to spot using 90 % encircled energy at focal point).
Temperature Range: -32 to 600 °C (-25 to 1100 °F)
Accuracy: -32 to -26 °C (-25 to -15 °F): ±3 °C
(±5 °F)
assumes ambient -26 to -18 °C (-15 to 0 °F): ±2.5 °C (±4 °F)
operating temperature -18 to 23 °C (0 to 73 °F): ±2 °C (±3 °F)
of 23 °C [73 °F])
For targets above 23 °C (73 °F): ±1
% or reading
or ±1 °C (±2 °F), whichever is greater
Repeatability: ±0.5 % or < ±1 °C (±2 °F),
whichever is greater
Response time: < 0.5 second (95 % of reading)
Spectral response: 8 to 14 μm
Emissivity:Digitally adjustable emissivity
(from 0.1 to 1.0 by 0.01)
Ambient operating range: 0 to 50 °C (32 to 120 °F)
Relative humidity: 10 to 90 % RH non-condensing,
at <30 °C (86 °F) ambient
Weight / Dimensions: 320 g (11 oz.)/200 x 160 x 55 mm (8 x 6 x 2 in.)
Power: 9 V alkaline or NiCd battery - 20 hours with laser and backlight
on 50 %
40 hours with laser and backlight off
Laser Sighting: Class II
Temperature Display: ºC or ºF selectable
410-600-1 Adjustable Emissivity
Supplies
Index
|
| Ulano One-Step Exposure Calculator
|
 The screenmakers #1 tool
for testing exposure is a Ulano One Step Test. Make one
test exposure and the neutral density filters simulate other
exposures. Test every mesh count, every stencil thickness
and speed or when you change coating or lamp procedures.
Includes a Ulano test positive, but you should use your
own positive and the 5 Step Ulano Filter. Instructions are
included. This is a must for inkjet and laser positives.
Instruction for Step-Wedge/Exposure Testing
301-900-2 |
| 21 Step Sensitivity Guide |
 This Sensitivity Guide is 1/2'' x 5'', having 21 steps progressively denser by increments of .15. It is used to determine and standardize the proper exposure and processing of photo sensitive materials. Used with litho plates, photo polymer plates, silk screen stencils, printed circuit boards, film positives, photo print papers and more.
301-905-1
|
| Thermo-Hygrometer Clock - Digital Humidiguide |
 Hygro/Thermometer Clock, Humidity Range 10 to 85% RH, Temperature
Range 14 to 140 Degrees Fahrenheit, Simultaneous Display.
Displays time, temp., and humidity.
Selectable 12-hour clock with DegreeF or 24-hour clock with DegreeC. Min./Max.
memory for both temp. and humidity. Plus or Minus1.8 DegreeF ( Plus or Minus1
DegreeC) accuracy; 10 to 85% RH with 6% accuracy. Dimensions: 4.3 x 2.8 x 0.8".
With built-in stand, mounting bracket, and AAA battery.
Temperature Range: 14°F to 122°F
Temperature Range: -10°C to 50°C
Relative Humidity Range: 25-85%
Special Features Displays Time
Battery Type AAA
Includes Built-in Stand, Wall Mounting Bracket and One AAA Battery
410-150-1
Supplies
Index
|
| Folding 6x Magnifier
|
 Folding
magnifier is a must for print or screen inspection at the
press. Your judgement is better when you can see more. Graduated
markings for thread counting or measuring. 6 power, double
element glass lens, anodized metal frame with etched measuring
scale around the 1"x1" opening, 1½"
working height, vinyl pouch. Folds flat so it's easy to
carry in your pocket.
500-175-1 6x power Linen Tester 1584 |
| Folding 20x Magnifier |
 Used
where higher quality optics are needed. All have color-corrected,
multi-element glass lenses for "flat-field" (distortion-free)
viewing across the entire working area. Threaded lens mounts
allow adjustable focus with locking rings to retain focus.
410-204-1 FM-20 Folding 10mm Lens Diameter |
| Magnifying Type Size Finder |
8 power measuring magnifier
has a built-in scale to measure points (1 point divisions)
for type size and inches (0.01" divisions) to measure
length and count threads.
 410-200-1
8x power |
| Egg-Cup 10x Magnifier |
 Keep
this 10 power magnifier at the press or in the screen room
to inspect stencils or prints. The clear plastic base lets
light into the viewing area from any direction. 10 power
very economical plastic magnifier is great for looking at
slides, stamps, coins, photographs, printed sheets, etc.
Multiple-element lens, 1-1/2 inches tall, 25 mm diameter
lens.
410-202-1 10x power
Supplies
Index
|
|
|
Shop
Online 