 |
|
|
THE
LAWSON BETA |
 Model
44 
 
Save space and money with the compact and portable Lawson Beta press. You'll
find it has many of the features of our more expensive presses, yet is specifically
designed for the budget-minded. Its all-steel construction and sturdy mechanical
components make the Beta a great press for the new start-up shop, prototype department,
school, or as a production cap printing unit. It's small and light enough for
one person to move anywhere it's needed.
 |
 |
| Model
41 (Shown w/Optional Floor Legs) |
Model
64 (Floor Legs standard on this press) |
Beta Bench Model 11
 The Lawson Beta incorporates many user-friendly features. Our functional design
combines the most practical mechanical features with production and printing demands
at very economical prices! In fact, all our Beta attachments are fully interchangeable
with the popular HD Series (slip-tube excluded). Combine this versatility with
our Trade-In, Trade-Up Program and you'll never have to worry about obsolescence
again!
Cap Attachment
 The
Lawson cap attachment is used for both single and multi-color cap printing. Simply
flatten the cap panel over the special platen for easy load and fast printing.
Our three-sided screen frame is thin on one side so you can print close to the
cap bill and requires no special equipment to expose.
Click
for optional platen choices
Side screen clamps... takes warp out of frame and relieves pressure on corner
joints. |
Standard
Features
Micro-Register
Roller-Bearing Registration
All-steel construction
Adj.
spring tension
Side screen clamps
Adj. slide platen
Adj.
platen height
Neck Platen
Quick-change
platen system
Interchangeable platens
with other Lawson presses
Easy-glide
rotation
Maximum
screen width = 22"
Standard Beta Models
1-Color,
1-Platen
4-Color, 1-Platen
4-Color,
2-Platen
4-Color, 4-Platen
6-Color;
1-Platen
6-Color;
4-Platen
Optional
Features
Lifetime Warranty
Floor
legs
Aluminum Platens
Cap
Attachment
Jacket Attachment
Speciality Platens
Pin
Registration
|
|
OPTIONAL FEATURES
- Micro-Registration: *** Now Standard*** Easy-to-use movement. Position the screen where you
want by simply moving side and rear knobs, and then locking the screen in place.
Now included at no extra charge on most Beta presses.
- Cap
Attachment "J" Style: This cap attachment features a bill-locator, plate grid
and side plates for easy cap alignment.
- Cap
Attachment "L" Style: Cap plate flattens the cap panel for fast cap placement
and printing. The 3-sided screen frame is easy to shoot and requires no special
equipment to make or use.
- Jacket
Hold-Down (HD): Slide-on attachment that pivots for fast jacket loading, printing,
and removal. Adjustable for shell or pile jackets. Also comes with special jacket
platen for smooth, distortion-free printing.
- Optional
Rear Clamp System: Use different size and shape screens. Easy to adjust side to
side, forward or back.
- Flat
Bed Vacuum System: Convert your printer to produce bumper stickers, heat transfers,
posters, decals and more. Easy to attach, the unit comes complete with vacuum
pump. table and foot switch. Vacuum area = 13" x 20".
- Platens...Shirts,
Sleeves, Legs, Pockets, Caps...
- All
platens are fully interchangeable with any Beta, HD or Alpha system. Custom sizes
and shapes available on request.
- Child
Size: 9" x 21"
- Youth:
11" x 21"
- Adult: 14" x
21"
- X-Large: 16" x 21"
- Single Sleeve: 4" x 24"
- Double Sleeve: 4" x 24"
- (2) Single Leg: 9" x 36"
- Cap Attachment:
- Slip-Tube/Platen
Support: Lawson slip-tubes fit all HDXL, HD-MAX and Beta presses. Make your own
custom platens or use in conjunction with any of our standard platens.
|
 |
| |
|
