| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shop
Online 
Test
our most popular chemicals with this trial package.
Low Odor - Low VOC solvent clean-up or screen opener for
plastisol and UV ink. Dries fast with no oily residue so
tape sticks easily. We like to dispense it with a 32 oz.spray
bottle so you only use a little each time. It is also an
excellent cleaner for the removal of platen or belt adhesive.
Powerful aerosol screen-opener that can be used at the press.
A quick spray and the toughest clogs can be wiped out. 
Our NEW low odor Soy-Based graphic ink degradent
is drain safe and works well on UV, enamel, lacquer, plastisol
and vinyl. Completely cleans and removes residual ink stains
so we also use it as biodegradable, drain safe, Non-Flammable
haze remover. 
ID-275 is especially designed for top[ and side loading
automatic ink removal systems. It is also used in fully
automatic in-line units. Great for sink-style recirculation
systems too.
Remove ink residue and the stencil in One-Step. Concentrated
new technology liquid you mix up to 6:1 with your water
for removing direct emulsion, capillary film or direct/indirect
system stencils. You decide the concentration. Soak in
dip tank for a few minutes and the stencil falls off the
mesh when you spray it out with water. Ideal for use in
dip-tanks. Odor-free and we add degreaser so when you
rinse, you are ready to coat. 
Used
in a Recirculation systems or as a Press Wash.
Great for UV, Solvents & Plastisol inks. Mild odor.
Includes degreaser. Drain safe.
Used
in a Recirculation systems or as a Press Wash.
Removes
cured plastisol mistakes when used in a high pressure airless
spot cleaning gun. Non-flammable with no solvent odors or
rings. Dries quickly to reduce ink spread and eliminate
moisture rings. Also removes ball point or felt tip pen,
vinyl or water-base screen printing inks.
A non-flammable solvent blend for removing ink spots/mistakes.
Good for all plastisols, oil and water-based inks.
Second
generation ink remover that does not contain methylene chloride,
perchloroethylene, ketones (like acetone or methyl ethyl
ketone) or any other chemical requiring a cancer warning.
Unlike Superkleen S.P.I.F. and other methylene chloride-based
products, S.P.I.F. II has a high T.L.V. and is not subject
to the methylene chloride exposure monitoring standards
and medical surveillance requirements. S.P.I.F. II is not
considered a flammable liquid.
Accidents will happen but you can remove them with spot
cleaning fluids designed for plastisols and an air-less
Spot Removal gun. Solid all metal body. Use with a vacuum
venting system for the safest and cleanest results.
Accidents will happen but you can remove them with spot
cleaning fluids designed for plastisols and an air-less
Spot Removal gun. 
Removes
light scorching on colors or whites, cotton or polyester.
The scorch is removed with oxidation, not bleach. Spray
a small amount on the scorched area and run it through the
dryer. 
Engineered to meet the demand for greater chemical resistance
and provide dependable, safe and economical dispensing of
screen printing liquids. Instant on/off control provides
smooth fast flow. Lightweight, rugged two-piece construction
eliminates mechanical difficulties. No wrench is necessary
for screwing faucets into pail opening. Hand tighten faucet
to the container then continue to rotate clockwise to dispensing
position. 3/4" standard threaded opening. | Copyrights 1995-2007 All Rights Reserved Lawson Screen & Digital Products, Inc. |
CALL TODAY: 1-800-325-8317 Price and Design Subject to Change Without Notice |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Copyrights 1995-2007 All Rights Reserved Lawson Screen & Digital Products, Inc. |
CALL TODAY: 1-800-325-8317 Price and Design Subject to Change Without Notice |
|