Expo-Light Screen Printing Exposure Unit

Expo Light Exposure Unit

The Lawson Expo Light is a completely self contained screen printing exposure unit.

It is shipped fully assembled, ready to use, with the entire light source and vacuum system safely contained within the main housing*. (*the 23" x 31" size has an optional external vacuum system)

Its compact enough to be easily moved anywhere and uses standard 120-volt, plug-in wiring. The Lawson Expo-Light is fast, consistent and reliable.

Lawson's exclusive instant vacuum draw-down provides positive film-to-screen contact for high resolution exposure. This is a feature that cannot be duplicated without a vacuum. In addition, the Expo-Light's dynamically balanced and focused-beam fluorescent tube system helps ensure good, clean stencil definition, screen after screen.

To add versatility, the Expo-Light can also be used as a light table. Simply place a durable, high-density piece of translucent fiberglass over the glass exposure surface, flip a switch, and you now have two machines in one! If your new to the screen-making world, don't worry! The Expo-Light exposure unit comes with a complete instruction manual/user guide, is easy to set up, use and maintain.

Request A Quote

Standard Features

  • Easy-to-Use Control Panel
  • 1-1/4-Horsepower Vacuum
  • Adjustable Screen Exposure Timer
  • Automatic Exposure and Vacuum Shut-Off Feature
  • Dynamically Balanced Tubes/Bulbs
  • Focused Light Rays
  • Exposure Calculator Printed on Control Panel
  • Even Light Distribution
  • Instant Vacuum Draw and Release
  • Gas Power Lifter on Vacuum Top
  • Light Table Mode Setting
  • Instant-Start Fluorescent Tubes
  • Non-Reflective Vacuum Blanket
  • Heavy-Duty, Rubber-Flex Vacuum Blanket
  • Bench Model Design
  • 120-Volt, Standard Plug-In Wiring
  • Shipped Fully Assembled
  • One-Year Parts Warranty (Excludes Blanket & Glass)

Standard Sizes

  • 24" x 24"
  • 23" x 31" (external vacuum is optional)
  • 32" x 48"
  • 48" x 72"

  • Custom Sizes on Request

Optional Features

  • Digital Timer
  • Floor Stand
  • Shelves
  • External Vacuum System (only for the 23" x 31" model)
  • Wheels/Floor Casters
  • Blacklights
  • Spare bulbs
  • Frames
  • Parahex Louver Grid
  • Export Electrics

Dimensions

  • 24 x 24: 37" wide x 28" deep
  • 23 x 31: 37"· wide x 28" deep (same size as the 2424, because of the external vacuum option)
  • 32 x 48: 61" wide x 37" deep

Note: allow an additional 4" for hose swing at rear of unit.

Reasons To Buy

  • Film-To-Screen Contact: Lawson uses a 1.25 H.P. Vacuum with an instant vacuum draw. The benefit is increased resolution and minimize distortion because of superior film-to-screen contact.
  • Focused Tube Exposure System: Lawson has designed the optimal tube-to-screen light array for enhanced screen resolution, minimal sawtoothing and faster exposure times.
  • Economically Priced: Competitive pricing for the budget-minded.

Expo Light Panel 

The Expo-Light Control Panel is easy to use.
Easy-to-use exposure timer; manual or automatic exposure modes and light-table controls.
Expo Light Stand
This photo shows the Expo-Light with Optional Floor Legs.
Floor Legs also include a convenient screen storage system.
Expo Light Stand
Close up of screen storage (included with the purchase of Floor Legs)

100% Satisfaction Guaranteed

lawson Digital and Screen Printing Equipment & Supplies

5110 Penrose St.
Saint Louis,MO 63115
314-382-9300 | Contact Us