Lawson Mustang Flat-bed Screen Printing Press

• Up-Front Peel
• Solid Aluminum, Honeycomb Vacuum Table
• Direct Dial Squeegee/Flood Bar Pressure Controls
• Side Screen Loading
• Dual-Crank Arms
• Low-Profile, Wide Rail Design
• Quick-Adjust Angle Controls
• On-Contact Ability
• Masterframe/Universal Screen Holder
• Micro-Registration with X,Y,Z Movement
• Adjus. Height Table
• Etched Micro Grid
• Variable Flood, Print and Lift Speeds...All DC Motor Controlled
• Single Cycle, Jog and Dwell Mode Settings
• Foot Pedal
• Electric Print Counter
• Sliding Frame Clamps
• Plated Carriage Assembly
• Adj. Print Stroke
• Channel-Balanced Vacuum with Adjustable Timing
• Slanted Control Box
• Etched Control Panel
• Off-Contact Control
• No Tool Adjustments
• Swivel/Anti-Rock Leveling Pads
• Wrap Safety Bar
• Safety Reset System
• Stationary Motor and Reducer (excludes Mustang 14)
• 120 Volts; 1-Phase, Standard Plug-In Wiring
• 1 Year Parts Warranty

* Recommended Frames Size is 1" less in the print stroke direction.
* Required if Optional Load-Leveler is Purchased
** Amperage must be recalculated if incoming voltage is different.

• Aluminum Squeegee Holder (with or without blade)
• Aluminum Flood Bars
• Load-Leveller (air required)
• Air Frame Locks (air required)
• Disappearing Guides (air required)
• Floor Casters
• Companion Take-Off (left side standard)
• Metal or Adjustable Screen Frames
• Export Electrics
• Faster screen loading
• Precise micro-registration
• Faster squeegee/flood pressure and angle adjustments
• Easier up-front peel/off-contact control
• Safety system that can't be beat all combine to guarantee you greater productivity, increased quality and a competitive edge.

Lawson's Mustang press is loaded with features that printers can use to increase production and profits.

• Low-Profile Dual-Crank Arms: Dual-crank arms produce more dependable and uniform squeegee and flood print control than single-drive crank systems. Low-profile design allows for greater shop visibility and screen access. Benefit: Smooth, even and consistent carriage drive. Better supervision, faster set-up, better control.
• Unique Peel System: Direct-Action Peel allows adjustment of peel/off-contact at only one point and at the front of the screen carriage, without tools. Peel settings are stepless, all mechanical and direct-acting for more accurate and visible control at the squeegee/print contact point.
• Solid Aluminum Vacuum Table: An all aluminum honeycomb core ensures flatness and resistance to all solvents. Other systems can warp and deteriorate.
• Single-Action Up and Down Squeegee and Flood Pressure Controls: Allows direct, precise pressure control with only one knob to adjust. Benefit: control, saves time and no tools are needed.
• Masterframe: Lock-In Head/Masterframe lowers to exact print position and ensures consistent and repeatable registration (+/-.001 inch) from print to print and job to job. Our quick-drop Masterframe allows the screen to be perfectly parallel to the vacuum table for the easiest and fastest screen-loading, registration and set-up in the industry. In addition, Lawson's special method of opposing cam rollers locks in the frame and head during the entire print cycle. Eccentric roller-bearings assure lifetime registration.
• Design: Wide Rail/Head Width guarantees more even and greater control of squeegee pressure over entire width of print area. Provides a larger area to view print, add ink and clean screen.