Trooper-12 Station Automatic Screen Printing Press

• Flex-Head/Modular Design
• Boom Control Box
• Touch Screen Controls
• Print Stroke: 18"
• Auto-Balance Squeegee
• Use Manual Size Frames
• Individual Head-to-Platen Registration Bearings
• Adjustable Print Stroke
• Individual Head Control
• Set-Up, Run & Dwell Print Modes
• Double Stroke on any head
• Front Micro-Registration
• Rear Micro (side-motion)
• Adjustable P & F Speeds
• Adjustable P & F Angles
• Off-Contact: 4-Point Control
• Aluminum Platens
• Aluminum. Squeegee Holder
• Easy Change Platens
• Adjustable Height Platens
• Platen Size = 16" x 18"
• Automatic Carousel
• Screen Capacity = 23" x 31"
• Two-Year Parts Warranty
• Seven-Year Reg. Warranty
• 120 Volts; Plug-In Wiring
• Air Required...Not Supplied

Diameter:

12-Station = 13.5 feet

• Extra Print Heads
• Modular Pre-Wire
• Rubber Platen Pads
• Extra Squeegees
• Air Frame Clamps
• Aluminum Youth Platens
• Aluminum Child Platens
• Aluminum Sleeve Platens
• Jacket Hold Downs
• Shuttle Flash Units
• Site Training (required)

Pricing:

10-Color;12-Station PC $52,500.00

• More User-Oriented Features and It's Easier to Use
  Lawson's easy-to-use Boom Control Box with Touch Screen Controls is intuitive and is loaded with lots of printer-friendly features.
• Use Standard Size T-Shirt Frames Use any size frame up to 23" x 31"...even your old manual frames (20" x 24") fit the Trooper.
• Auto-Balance Squeegee System
  Lawson's unique squeegee system automatically balances squeegee pressure from side-to-side, front-to-back and instantly adjusts itself to variations in garment thickness and platen heights.
• Dual-Action Squeegee
  The Trooper uses a dual-action (flip-flop) industry standard aluminum squeegee holder.
• Double Print
  This Trooper-12 allows you to simulate manual printing where you desire a double print stroke. For many applications, this is ideal method of "clearing the screen mesh and providing a true top-coat" deposit of ink.
• Flex-Head Design
  Choose the number of print heads you want and where to place them anywhere you desire. Design your own load/unload stations and the number of open cooling stations you may want as well.
• Shuttle Flash Capability
  The Trooper is designed to accommodate Lawson's unique QZE-Shuttle Flash Unit. This allows you the ability to flash as many colors as necessary, without loosing the use of the print head! When the head is raised, and while you are unloading/loading, the Shuttle Flash automatically positions itself over the printed garment, flashes based on the temperatures and dwell time you set, and then returns to its resting/home position during the next print cycle.
• Affordable and Best Value
  Prices are very reasonable and structured on a modular basis. You can design your Trooper based on your specific print and flashing needs and add additional print heads in the future.