Manual & Auto Flash Units
The Lawson Econo Flash - A Basic Flash Unit
Lawson Econo Flash Units gels most plastisol inks in 5-7 seconds and "cures" plastisol inks in 20 - 40 seconds.
All are adjustable in height to fit any press, include a handle to swing the I.R. Panel easily over your garment, include casters and are ETL approved. These flash units are "anti-tip" designed and all our manual flash units have positioning handles for easy rotation, from any direction. Plugs directly in to any standard grounded outlet - no temperature controller.
Standard Sizes:
- 16" x 16" (120 volts; optional 230 volts)
- 18" x 18" (120 volts; optional 230 volts)
The Lawson Super Flash - Units with Temerature Control
The Lawson Super Flash has an adjustable temperature controller with an integrated heat-cycle indicator light, is adjustable in height and includes floor casters.
Standard Sizes:
- 16" x 16" (120 volts; optioal 230 volts)
- 18" x 18" (120 volts or optional 230 volts)
Custom Sizes Available Upon Request
The Lawson Roto Flash - Automatic Swing-Over Flash Unit
The Roto Flash #1616 is an screen printing flash unit with a motorized swivel that moves the heat panel over your platen with a timer or foot pedal. With the delay timer it will automatically swing away from the platen so your flash time is always the same. No more burned platens!
Besides being attractive, safe and functional, Lawson's Flash units are designed for maximum energy efficiency. The flash heat emitter is color-blind and designed for optimum flash output and maximum edge-to-edge heat distribution. The flash element is even insulated to help direct and focus the infrared emissions. Great for flashing any plastisol ink in seconds.
- Standard Features
-
- Casters
- Adjustable Height
- 360 Degree Rotation Ability
- Anti-Tip Floor Stand
- 1-Year Heating Element Warranty
- National Safety Code Certified/ETL
Standard Sizes
- 16" x 16" (120 volts)
- 18" x 18" (120 or 230 volts)
- Custom sizes available on request
Can be shipped via UPSELEMENT SIZE
In InchesVOLTS AMPS HEATER DIMENSIONS
W x L x D
In InchesPLUG TYPE 16 x 16 115 14.2 16 x 20 2 3/4 NEMA
5-15P18 x 18 115 16.0 18 x 22 x 2 NEMA
5-20P - Optional Features
-
- Locking Floor Casters
- Digital Temperature Controller
- Specifications
-
Cure AreaTemp ControlElectricCastersWarranty
Insta-Flash 16x16Y120 volts, 15 ampsoption3 year16x16 w/airY120 volts, 20 ampsoption1 year20x20Y230 volts, 14 ampsoption3 year20x20 w/airY230 volts, 14 ampsoption1 year12x24Y230 volts, 14 ampsoption1 year12x36Y230 volts, 20 ampsoption1 yearEcono Flash 16x16N120 volts, 15 ampsyes1 year16x16N230 volts, 8 ampsyes1 year18x18N120 volts, 15 ampsyes1 year18x18N230 volts, 14 ampsyes1 yearSuper Flash 16x16Y120 volts, 15 ampsyes1 year16x16Y230 volts, 8 ampsyes1 year18x18Y120 volts, 15 ampsyes1 year18x18Y230 volts, 14 ampsyes1 yearHot-Shot IR Manual 18x18Y230 volts, 16 ampsoption1 yearAutomatic Shuttle Flash UnitsRoto-Flash 16x16Y120 volts, 15 ampsoption1 year18x18Y120 volts, 15 ampsoption1 yearHot-Shot IR Shuttle 18x18Y230 volts, 16 ampsoption1 yearQuartz QZE Shuttle 18x24Dwell230 volts, 22 ampsyes1 year - Reasons To Buy
-
- Adjustable Temperature Controller (on all Super Flash Units): Control the temperature to match ink and flashing requirements.
- Anti-Tip & Adjustable Height Floor Stand: Position the I.R. element anywhere desired without fear of tipping.
- 1-Year Complete Parts Warranty: Flash cure with confidence, reliability and consistency.
Lawson Flash Units all Feature:
- Even Flash Heating - Consistent heat radiating over entire element surface.
- Low profile design - Units easily fit into areas where clearances are critical.
- Easy Installation - Light weight modular design permits simple installation on stands, printers -over tabletops or conveyors.
- Solid State Temperature Controls - Variable heat controller permits infinite temperature settings from 0 - 100%.
- One Year Parts Warranty
