The Lawson Blazer screen printing conveyor dryer is designed for complete flexibility and maximum versatility. The Blazer features a fully modular design and can be easily customized and expanded whenever your needs may change. This custom screen printing machine is the ideal dryer to maximize your investment dollars.
It is designed for curing both plastisol and water-based inks. The basic conveyor is only 8' long, and includes one 3' heat chamber/curing module of your choosing. You can add any amount of heat chambers/curing modules at any time, even years later.
Select a standard belt width and standard length conveyor belt, or create a custom width and length that fits your specific needs. You can always increase the in-feed or out-feed of the Blaze anytime you want - this is a totally modular dryer!
1) Start by selecting the Width Conveyor Belt that you want:
Standard Belt Widths: 24", 36", 48", 60"
2) Then select how Long you want your dryer to be:
Standard Belt Lengths: 8', 12', 16', 19'
3) Now select one of the following 3' Heat Chamber Modules:
A) I.R. with Jet-Air (most popular module)
B) Quartz with Jet-Air (includes an energy saving photo garment sensor for instant on/off and is a great production booster)
C) Gas I.R. with Jet-Air (ideal for those with limited power availability and who want a small gas I.R. dryer)
D) Jet-Air Cooling Modules
E) Split Belt Designs (2 or 3 belt designs available)
All heat chambers are specifically designed to maximize energy efficiency and are double insulated. If you are looking for a conveyor dryer that saves space and energy, and still provides maximum production, then the Blazer is an ideal companion to manual or automatic presses.
Custom lengths are easily accommodated
- Up-Front, Side-Mounted Digital Control Panel
- Diagnostic Digital Control/Monitor System
- Arrow Belt™ Tracking System
- Solid-State Electronic Temperature Controller
- Adjustable Temperature Up To 395oF
- Complete-Wrap Insulation Package
- Triple-Wall Construction
- Conveyor Belt Supports
- Direct-Drive Conveyor System
- Moveable Heat Chamber
- Solid-State Digital Belt Speed Controller
- Four (4)-Point Belt-Tracking
- Heat Reflective "S & S Memory Belt"
- Reflective Heat "Booster Lining"
- Rugged, Solid-Steel Construction
- Adjustable Entrance and Exit Door Opening
- Hinged Top For Easy Access
- Exit Exhaust Hood
- 15 Year I.R. Heater Warranty
- 3 Year Defective Parts Warranty
- 24/7/365 Technical Support
- Additional In-Feed or Out-Feed Belt Extensions...add as much length as desired to customize your dryer.
- Quartz Chamber/Jet-Air with Electric-Eye Sensor
- Additional I.R./Jet-Air 3' Module
- Turbo-Cooler 3' Module
- Gas I.R./Jet-Air 3' Module
- Split Belt Options
- Custom Belt-to-Heater Clearance Height
- Custom Design Features for Special Needs/Applications
- Export Electrics
View Detailed Specifications
Heater Warranty 15 Years 15 Years 15 Years 15 Years Defect Warranty 3 Years 3 Years 3 Years 3 Years Belt Width 24" 36" 48" 60" Overall Width 38" 50" 62" 74" Overall Length #08 8' 8' 8' 8' Overall Length #12 12' 12' 12' 12' Overall Length #16 16' 16' 16' 16' Floor-to-Belt Height 33" 33" 33" 33" Heat Chamber Height 18" 18" 18" 18" I.R./Jet-Air: 230, 1-Phase, Amps 28 42 54 68 I.R./Jet-Air: 230, 3-Phase, Amps Heater Size 24" 36" 48" 60" Heater Wattage 6000 9000 12000 15000 Est. Cost/hr to Operate(based on 10 cents/kwh) $0.60 $0.90 $1.20 $1.50 Air-Zone - High-Pressure Hot Air Jet Plenum 1 1 1 1 Est. Max. Production - Plastisol* 270+ 325 480 570 Est. Max. Production - DTG/Digital* 72 144 200 250 Quartz/Jet-Air, 220, 1-Phase, Amps 27 39 51 63 Quartz/Jet-Air, 220, 3-Phase, Amps 21 30 39 48 Heater Wattage 5900 8500 11220 13860 Air-Knives 6 6 6 6 Est. Max. Production* 240 325 480 570 I.R. Gas/Jet-Air, 120, 1-Phase, Amps 3 3 5 5 Heater BTU's   Air-Zones 1 1 1 1 Est. Max. Production* 240 325 480 570
*Production speeds are estimates and will vary depending on ink, garment, humidity, deposit, and other variables.
Electrical Wiring: 3-Wire + Ground
View DiagramDigital Controls - State-of-the-art monitoring of Temperature, Voltage, Amerage, Current and Energy Usage.Digital Belt Speed Controls with Display - Featuring a Reversable Conveyor Belt, and Digital Conveyor Speed Monitoring for Repeatable Curing Times.Reversible Belt Direction - you are in control of your workflow, and you can change directions anytime you want without having to re-track your belt.Triple Wall Insulation to maintain heat chamber temperature and energy-efficiency. The Blazer's bottom is even Insulated!Easy-Access Heat Chamaber! Simply lift the hinged heat chamber top up, to gain total access to the heat chamber, heating elements and jet-air plenums - all without disconnecting any wires, and without any tools.
4-Point Belt Tracking - makes expansion easy!
Add-On Ready Extension System allows you to add belt length and/or additional heat modules.
Durable Floor Legs - detachable for moving up or down stairs.
Digital Controls - State-of-the-art monitoring of Temperature, Voltage, Amerage, Current and Energy Usage.
Digital Belt Speed Controls with Display - Featuring a Reversable Conveyor Belt, and Digital Conveyor Speed Monitoring for Repeatable Curing Times.
Direct Drive Motor Conveyor System - no dirty, greasy chains to adjust!
Reversible Belt Direction - you are in control of your workflow, and you can change directions anytime you want without having to re-track your belt.
Integrated Exit Exhaust Hood - standard on every Blazer
Triple Wall Insulation to maintain heat chamber temperature and energy-efficiency. The Blazer's bottom is even Insulated!
Tech Display Moniters Voltage, Amps, Current/Watts and Energy Usage
Easy-Access Heat Chamaber! Simply lift the hinged heat chamber top up, to gain total access to the heat chamber, heating elements and jet-air plenums - all without disconnecting any wires, and without any tools.
Entrance and Exit Energy-Saving Doors.
Lawson's exclusive state-of-the-art Arrow Belt Tracking System guarantees perfect belt tracking. The belt cannot move from side-to-side, as it is guided by Lawson's exclusive "tounge-n-groove" belt and pulley system.