• Frontier Gas Dryer Glamour Shot
  • Frontier Gas Dryer back
  • Frontier Gas Dryer Front w Ctrl Panel
  • Frontier Gas Dryer Control Box
  • Frontier Gas Dryer Glamour Shot diagram
  •  
    Lawson Diamond-Jet Direct-To-Garment Printer - Express Jet Direct To Garment Printer
  •  
    Lawson Diamond-Jet Direct-To-Garment Printer - Express Jet Direct To Garment Printer
  •  
    Lawson Diamond-Jet Direct-To-Garment Printer - Express Jet Direct To Garment Printer
  •  
    Lawson Diamond-Jet Direct-To-Garment Printer - Express Jet Direct To Garment Printer
  •  
    Lawson Diamond-Jet Direct-To-Garment Printer - Express Jet Direct To Garment Printer

Frontier Gas Conveyor Dryer

Buy Now Request Quote Financing

Share This
Questions about this product?
Contact Us Today
or Give us a Call - 1.800.325.8317


Description

The Lawson Frontier Jet Dryer is engineered for heavy-duty, constant production. Its rugged construction and advanced design make it exceptionally versatile and able to withstand the most relentless use.

The Frontier is available either as an all-electric or gas fired, high-velocity jet dryer. It will handle sheet and board stock such as vinyl, Mylar, tissue, paper, cardboard, plastic, wood, fiberboard and more. Lawson's exclusive Uni-Flo/Air-Knife jet chamber ensures efficient, rapid and thorough drying of almost any kind of ink. Lawson's Uni-Flo/Air-Knife heat chamber creates an evenly distributed, continuous air-impinged, high-velocity jet-air action. The substrate is constantly subjected to powerful jet streams that penetrate the solvent/ink barrier, drying most inks in seconds.

For Smaller Production Needs, Small Space Requirements, and/or Limited Power: As about our New Omega GAS EXPRESS conveyor dryer only 12' long (4' In-Feed; 8' Heat Chamber; 4' Out-Feed).


Standard Features

  • Modular design
  • Uni-Flo/Air Knife Jet Heat Chamber
  • Removable Side Panels
  • Uni-Vac vacuum hold-down
  • Anti-flutter substrate design
  • Adjustable Boom Control Box
  • Full chamber and furnace insulation wrap
  • Digital temperature controls up to 400-F (depending on model)
  • Direct-drive D.C. conveyor motor
  • Air Filters
  • Digital Belt Speed Controller
  • Interlock safety control system
  • Adjustable entrance and exit panels
  • Reversible belt with 4-point belt tracking
  • One-year parts warranty

Standard Sizes/Common Textile Configurations:
4' In-Feed
12' Convection-Air Heat Chamber
3' Out-Feed
48-inch belt width x 19'
60-inch belt width x 19'
72-inch belt width x 28' (8 + 12 + 8)

Standard Graphic Configurations:8-Foot In-Feed
12-Foot Convection-Air Heat Chamber
1' Chamber Spacer
6' Cool Chamber
3-Foot Out-Feed
48-inch belt width x 30' long
60-inch belt width x 30' long

Optional Features

  • V-Tech U.V. Combo Unit
  • High-temperature heat package
  • Extra-high stock clearance
  • Infra-red heat boosters
  • Extra in-feed or out-feed
  • Extra heat chamber modules
  • Extra cool chamber modules
  • Heavyweight item support
  • Metal conveyor belt
  • View Detailed Specifications

     481960197228
    Electricl Requirments 30 Amps, 230 Volts; 3-Phase 30 Amps, 230 Volts; 3-Phase 40 Amps, 230 Volts; 3-Phase
    Overall Length 19' 19' 28'
    Oven Length 12' 12' 12'
    In-Feed Length 4' 4' 8'
    Out-Feed Length 3' 3' 8'
    Overall Width (including control box and air plenum box)      
    Overall Height      
    Belt Height 34" 34" 34"
    Belt Width 40" 48" 60"
    Belt Type PTFE Coated Fiberglass PTFE Coated Fiberglass PTFE Coated Fiberglass
    Belt Speed 30 seconds - 3 minute cure time 30 seconds - 3 minute cure time 30 seconds - 3 minute cure time
    Belt Speed Control Digital Digital Digital
    Temperature Control Digital, upto 400-F Digital, upto 400-F Digital, upto 400-F
    Oven Temperature Accuracy +/- 2 degrees +/- 2 degrees +/- 2 degrees
    BTU Input Minimum 50,000 50,000 50,000
    BTU Input Maximum 500,000 500,000 750,000
    Exhaust Airflow      
    Heat Chamber Blower Motor 5 H.P. 5 H.P. 7 H.P.
    Air Filters Yes Yes Yes
    Safety Interlock Controls Yes Yes Yes
    Safety Standards ETL ETL ETL
    Gas Pressure Requirments 7" Water Column 7" Water Column 7" Water Column
    Gas Service Inlet 3/4" NPT 3/4" NPT 1" NPT

Videos

Coming Soon

Graphic Equipment


Heat Transfer Equipment


Used Equipment

5110 Penrose St.
Saint Louis, MO 63115
314-382-9300