1. Prepare your artwork and transfer with consideration to the size and shape of the pendant.
2. Make sure both the transfer and pendant are dry and free of debris.
3. Using heat resistant tape, fasten the pendant in position facing the printed side of the transfer.
4. Spread a teflon sheet (or white paper) on the bottom of the press.
5. Place the pendant with transfer on the platform with the transfer facing down.
6. Cover with a heat conductive rubber pad.
7. Press with medium pressure 75 Seconds.
8. Remove from the press.
9. Clean any residue on the pendant with a clean cloth and water or rubbing alcohol.
10. Allow to cool on a clean surface.