Heat
Press Settings
Polyester T-Shirts
Temperature: 400°
Time: 50 Seconds
Pressure: Light to Medium
|
|
 Step
1
Prepare your artwork and transfer
with consideration to the size of the
t–Shirt.
Spread a teflon sheet (or white paper) on the bottom of the
press.
Place a t–shirt over the teflon sheet on the press and
remove any wrinkles.
|
 Step
2
Slide a teflon sheet inside
the shirt to protect the back of the shirt from
sublimation.
Place the shirt, face-up, on the platform, smoothing out folds
and wrinkles.
Place the transfer, face-down, in position on the shirt.
Cover the shirt and transfer with a teflon sheet, assuring
the transfer and shirt remain in position.
Press with medium pressure 50 seconds.
 Step
3
Remove the shirt from the press.
Allow to cool on a clean surface. |
 Additional
Notes
Please take note of the variation
of printable areas from shirt size to shirt size. You may need
to adjust your transfer size for each shirt size or design a size
that will suit all sizes.
You may choose to “pre-press” your garment for 5 seconds
to remove any moisture that may be present.
A lint brusher or roller will remove any clinging debris that
may compromise your imaging.
To sublimate to a Soft L’Ink Sweatshirt, use the same instructions
as the Tee’s, but increase press time by 10 seconds.
 Back
to Sublimation Instructions |
