How To Dye Sublimate White Coated Sheet Metal

Heat Press Settings Temperature: 400° Time: 45 - 55 Seconds Pressure: Medium	Back to Sublimation Instructions
Step 1 Prepare your artwork and transfer with consideration to the size and shape of your sheet or cut sheet metal. Using heat resistant tape, fasten the metal in position facing the printed side of the transfer. If using Unisub metal make sure you remove the thin plastic protection film on the face of the metal.
Step 2 Spread a teflon sheet (or white paper) on the bottom of the press. Lay the metal face–down (transfer, face–up) on the heat press. Cover with teflon sheet (or white paper).
Step 3 Press for 45–55 seconds
Step 4 Remove the metal and transfer from the press. Slowly peel the tape and transfer from the metal. Allow to cool on a clean surface.
Back to Sublimation Instructions

CALL TODAY: 1-800-325-8317
Price and Design Subject to Change Without Notice