Computer-to-Screen & Laser-to-Screen Machines

Move from digital artwork to screen preparation without traditional film positives. Explore computer-to-screen imaging systems and laser-to-screen equipment for commercial screen-printing shops, with options from Advanced Inkjet Technology, SAATI, and KIWO.

Compare inkjet, wax, and direct-laser technologies around the way your screen room operates. Inkjet and wax systems place a light-blocking image onto an emulsion-coated screen, while direct-laser systems expose the stencil digitally. Exposure arrangements vary by model: some systems require a separate exposure unit, while others integrate imaging and exposure.

The ScreenPRO 600 combines inkjet imaging with an integrated exposure light bar. SAATI direct-laser systems provide another approach by exposing the emulsion without film positives or imaging ink and wax. Choose equipment around your frame sizes, artwork detail, emulsion requirements, and daily screen volume.

Computer-to-Screen & Laser-to-Screen Machines

Understand the Difference Between CTS and LTS

Computer-to-screen is a broad term for digitally transferring artwork into the screen-making process without a traditional film positive.

Inkjet and wax CTS systems apply a UV-blocking image to the coated screen. The screen must then receive the appropriate exposure, whether through a separate unit or an integrated system.

Laser-to-screen equipment uses a controlled light source to expose the emulsion directly. It eliminates the ink or wax imaging layer, but screen coating, drying, development, and other preparation steps remain part of the process.

Compare the actual sequence for each model rather than assuming every CTS machine performs the same functions. The ScreenPRO 600, for example, includes integrated exposure even though it uses inkjet imaging.

Match Frame Size and Image Area

Check both the maximum outside frame dimensions and the maximum active image area. These measurements serve different purposes and should not be treated as interchangeable.

The ScreenPRO 600 lists a maximum frame size of 25" × 36" and a maximum image area of 20" × 26". The SAATI LTS E70B also lists a 25" × 36" maximum frame size, but its published image area is 23.6" × 31.4".

Also verify minimum frame dimensions, frame thickness, loading orientation, and compatibility with the frames already used in your shop.

Compare Exposure Arrangements

Determine whether the selected system requires an existing exposure unit, incorporates an exposure light bar, or directly exposes the emulsion with lasers.

Integrated exposure can reduce transfers between pieces of equipment. However, it does not eliminate the need to coat and dry screens correctly or develop them after exposure.

Confirm emulsion compatibility, coating requirements, exposure calibration, and any required finishing steps for the selected system.

Evaluate Detail Using Your Own Artwork

Review resolution alongside the kind of work you actually produce: small text, fine lines, halftones, or large solid areas.

The ScreenPRO 600 lists imaging resolution up to 1440 × 1200 dpi. The SAATI LTS E70B lists selectable 1270 and 2540 dpi modes. These specifications describe different imaging technologies and should not be treated as a complete ranking of stencil quality.

Evaluate sample screens using your artwork, mesh, emulsion, and printing requirements. DPI alone does not establish the finest reliable halftone or the quality of the final printed garment.

Review Registration From Artwork to Press

Digital screen imaging can support repeatable image placement, but the complete registration process still matters.

Check how the machine locates the frame, how artwork positioning is controlled, and how the screen transfers to the press. Frame condition, mesh stability, screen tension, and press setup can all affect the result.

Do not assume that digital imaging guarantees perfect registration or eliminates all on-press adjustment.

Confirm Software and File Requirements

Review the included RIP, machine-control software, workstation requirements, and licensing.

The ScreenPRO 600 listing includes ColorPrint Server RIP, Print Production Screen Software, and Printer Control Software, with support for several artwork file formats. The SAATI LTS E70B lists a 1-bit TIFF workflow.

Confirm how your existing separation software will connect to the selected machine. Check file preparation, output resolution, screening settings, and training requirements before changing your production process.

Compare Consumables and Maintenance

Film-free does not mean cost-free.

Inkjet and wax systems require compatible imaging materials and model-specific maintenance. Direct-laser systems remove the need for film, imaging ink, and wax, but still require screen-making materials, cleaning, service, and routine care.

The collection includes CTS inks and flushing solution alongside imaging equipment. Match each consumable to the approved machine rather than assuming all CTS inks or cleaners are interchangeable.

Plan Utilities and Installation

Confirm electrical service, compressed-air requirements, machine dimensions, weight, and service clearances for the exact configuration.

The ScreenPRO 600 lists single-phase 220V power. The SAATI LTS E70B lists 110V input and compressed air for its pneumatic clamps. These requirements should not be extended to other systems in the collection.

Review delivery access, unloading arrangements, floor capacity, and the space needed to load and unload frames before installation.

Measure Capacity Across the Screen Room

Evaluate the number of usable screens your complete process can produce—not imaging speed alone.

Include coating, drying, file preparation, frame loading, imaging, exposure, development, inspection, and movement to the press. A faster imaging machine may reveal a bottleneck in another part of the screen room.

Compare cycle times using representative artwork, screen sizes, and the quality settings your shop needs.

Review Training and Support

Confirm installation, software setup, operator training, maintenance instruction, and warranty coverage before purchasing.

Computer-to-Screen & Laser-to-Screen Machines

What is a computer-to-screen machine?

A computer-to-screen machine transfers digital artwork into the screen-making process without a traditional film positive. Depending on the system, it applies an ink or wax image to the coated screen or exposes the emulsion directly.

What is the difference between CTS and LTS?

CTS is a broad term for digital screen imaging. Inkjet and wax CTS systems apply a light-blocking image to the screen. LTS systems use a controlled laser light source to expose the emulsion directly.

Which imaging systems are included in this collection?

The collection includes ScreenPRO imaging systems, SAATI laser imaging equipment, KIWO LX systems, and a CTS Wax-Jet printer. Check individual listings for current models and configurations.

Do these systems eliminate film positives?

The listed digital imaging approaches remove the traditional film-positive step. They do not eliminate screen coating, drying, development, inspection, or other required screen-making tasks.

Does every CTS machine need a separate exposure unit?

No. Exposure arrangements vary. The ScreenPRO 600 includes an integrated exposure light bar, while direct-laser systems expose the emulsion digitally. Confirm the complete workflow for the selected model.

Does the ScreenPRO 600 use ink or lasers?

The ScreenPRO 600 uses piezoelectric inkjet technology to apply UV-blocking ink. It also includes an integrated light bar for exposure.

Do direct-laser systems use imaging ink or wax?

Direct-laser systems such as the SAATI LTS E70B expose the emulsion without imaging ink or wax. They still require compatible screen-making materials and routine maintenance.

Can I use my existing screen frames?

Possibly. Confirm the machine’s minimum and maximum frame dimensions, frame thickness, loading requirements, and active image area before assuming compatibility.

What is the difference between frame size and image area?

Frame size describes the outside dimensions of the screen frame the machine accepts. Image area describes the portion the machine can image or expose. A frame that fits does not guarantee that every desired design will fit within the usable image area.

Will a CTS or LTS machine guarantee perfect registration?

No. Registration also depends on artwork positioning, frame condition, mesh stability, screen tension, and press setup. Digital imaging does not eliminate every source of alignment error.

Can I use any emulsion with a laser-to-screen system?

Do not assume universal compatibility. Confirm the approved emulsion, coating thickness, drying conditions, and exposure settings for the selected system.

Do the screens still need to be developed after imaging?

Yes. Imaging or exposure does not replace screen development. Follow the approved process for the machine and emulsion, including any required drying or finishing steps.

Can I use my existing RIP software?

Compatibility depends on the system. Review supported file formats, licensing, screening requirements, and machine-control software. The SAATI LTS E70B lists a 1-bit TIFF workflow, while the ScreenPRO 600 includes its own software package.

Are CTS inks and flushing solutions interchangeable?

Do not assume they are. Use imaging ink, wax, and cleaning products approved for the exact machine. Incorrect consumables can affect imaging performance and maintenance.

Does LWG provide installation, training, and technical support?

LWG lists installation, training, and service capabilities. Confirm the specific services, warranty terms, freight arrangements, and support included with your selected system.