
Scout Manual Screen Printing Press
Save space and money with the compact and portable Lawson Scout printing press. You'll find the Lawson Scout is ideal for schools, clubs, beginners and the serious hobby printer. The Lawson Scout screen printing machine is specifically designed for the budget and space-conscious. Available as a table-top unit or with an optional floor stand, the Scout is the easiest to use screen printing machine. It comes fully assembled so you don't waste time having to put anything together.
Success Begins Here
- 1-Color, 1-Platen/Station
- 4-Color, 1-Platen/Station
- 4-Color, 4-Platen/Station
-
Standard Features
- Rear Clamp Frame Holding
- Adjustable Clamp Height and Angle
- All-Steel Construction
- Compact, Portable Design
- Adjustable Slide Composite Platen
- Maximum Screen Width = 23"
- 1-Year Parts Warranty
Optional Features
- Floor Legs
- All Metal Platen(s)
- Additional Platens for Different Prints
- Youth: 11" x 21"
- Adult: 14" x 21"
- Various Platens for Sleeves
-
X-Large: 16" x 21"
-
Coming Soon
-
-
Scout #41 Manual Screen Printing Press
Showing the Lawson Scout 4-Color; 1-Station mounted on its optional floor stand. Space requirements are very small: 48" (front to back) x 24" (left to right) All 4' diameter when all 4 screens are being used.
-
Scout #41 Manual Screen Press - No Screens
Here is the Lawson Scout shown with no screens in place. Shown with optional floor stand.
-
Scout #11 Manual Press Bench Model
Showing a close up of the Scout 1-Color, 1-Station bench module - bolted to a table (table not included). Notice the massive head pivot system, and the reinforced rear screen clamps.
-
Scout #11 Manual Press Bench Model with Screen
Here the Scout is shown mounted to your own table. Compact Size: 30" long x 14" wide. (unit must be bolted to a table or other platform to properly use)
-
Scout #11 Manual Screen Press without Screen
-
Scout Platen Support Arm
Here we are showing the 1 Station Scout, with its massive/sturdy Platen Support Arm.
-
Scout 44
-
Scout 44 Center Hub
The Scout is an economy press, built to last. Notice the large rod-ends and strong steel platen support arms.
-
Scout 44 Clamp With Frame
This picture shows the Scout print head in the up position wtih screen frame locked in place.
-
Scout 44 Frame Clamp
The Scout is a rear-clamp printing press. Included is Lawson frame locking bar (show in photo).
-
Scout 44 Top View
A cool top-down view of the #44 Scout.
-
Scout 44 Slip Tube And Platen
This image shows the Lawson slip-tube, twin locking thumbscrews, and platen support tubes. Also note the platen may be easily leveled.
-
-
Coming Soon
All-steel construction and sturdy mechanical components make the Scout a great press for printing t-shirts. It's small and light enough for one person to move anywhere it's needed. Just clamp (or bolt down) on a sturdy table and you are ready to start using.
The main difference between the Scout and the Proton is the Scout press is not modular in design, and is only available in 1 and 4 colors, and with either a single or 4 print stations. The Scout uses dual nylon registration bolts instead of dual bearings. Buy the Scout if you want to save money and save space.